What Wood To Use To Build Kitchen Cabinets

Other types of commonly used hardwoods are the rich and dark brown walnuts and the straight grained.

What wood to use to build kitchen cabinets. Face frames cover plywood edges. Birch beech and white or red oak. Maple hickory oak ash and cherry. What you will need to build your own diy kitchen cabinets.

Butt joints and wood screws. Plywood upper cabinets if you are looking for an inexpensive way to build some upper kitchen cabinets then you might want to consider these. Open grained wood has a rougher look and likely needs filler to look good when painted. The bottom piece will be 24 deep but the width will depend on the dimensions of your kitchen.

Overlaps on the sides let you fine tune the cabinet width during installation. Again for wall cabinets the depth will be somewhere between 12 14 not 24. It s best to build out of tight grain woods to avoid this. Cone bearing evergreen.

Plywood is usually an inexpensive building material and the cabinets are beautiful in my opinion. Face frames and cabinet doors often consist of solid hardwoods. The sample base and wall cabinets shown belowhave these features to make building them as simple as possible. I use wood glue and good fasteners.

The 3 4 plywood case eliminates panel jointing planing and glue ups. It s important to use dead straight wood for bases so it ll be flat for setting the cabinets. Spruce pine and fir softwoods. The best wood for cabinet making beneath the veneer.

Plywood that matches the cabinets. Paint grade wood tends to be of the tighter grained varieties such as soft maple hard maple poplar and pine among others. I have found this method sufficient for most of my projects especially painted projects. Red or white oak beech and.

Birch purebond plywood full sheets are best but 2 8 sheets would work as well hickory 2 4 purebond plywood panels birch purebond plywood full sheets are best but 2 8 2 4 or 4 4 sheets would work as well. Maple is a popular wood choice because it s readily available and reasonably easy to work with. Plywood is an engineered glued and laminated wood overlaid with a hardwood veneer typically less. You need a drill driver to drive in your screws and that s it.

I build a lot of cabinets and built ins this way. Most factory built cabinets have a recessed toe kick that s typically about 4 in. The reason is because they are constructed of plywood. One of the most commonly used hardwoods by cabinetmakers is medium priced red oak.